黃世疇 教授
- 系所：機械工程系
- 研發領域：機械工程
- 標籤： 機械生物力學
- 專長： 生物力學,撓性機構,微機電系統,材料特性
- 學歷：
辛辛那提大學機械工程博士
- 經歷：
- 電話：(07)381-4526#15313
- 傳真：(07)383-1373
1
兩自由度調諧質量阻尼平台系統及其操作方法
1
新型仿生分層波紋薄壁管在軸向載荷下的耐撞性能分析Analysis of the Crashworthiness Performance of a Novel Bio-Inspired Hierarchical Corrugated Thin-Walled Tube under Axial Loads
2
一種新型柔順齒輪齒條機構的設計與分析Design and Analysis of a Novel Compliant Rack and Pinion Mechanism
3
高爾夫球頭功能角度檢測模組設計Module Design for Functional Angle Inspection of Golf Head
4
神經網絡擬合的多目標最佳化算法在多细胞管道結構的能量吸收能力增强之設計分析Design Analysis of Neural Network-Fitted Multi-Objective Optimization of a Bio-Inspired Multicellular Tube for Enhanced Energy Absorption Capacity
5
受矽藻啟發之仿生薄壁用於能量吸收結構最佳化設計與分析Optimal Design and Analysis of a bio-inspired of diatoms thin-walled using in energy absorption
6
仿生蟑螂消化系統之薄壁超材料用於能量吸收結構最佳化設計與分析Optimal Design and Analysis of a Bio-inspired of Cockroach Digestive System Thin-walled Metamaterials using in Energy Absorption
7
汽車傳動零件於設計及熱鍛製程之多目標最佳化Multi-Objective Optimization of Automotive Transmission Parts in Design and Hot Forging Process
8
應用擴展有限元法結合水平集方法模擬功能梯度材料板材料邊界附近圓孔處的應力集中係數Using the Extended Finite Element Method to Integrate the Level-Set Method to Simulate the Stress Concentration Factor at the Circular Holes Near the Material Boundary of a Functionally-Graded Material Plate
9
儲能系統與太陽能發電系統於工廠電力網之 最佳容量規劃與併入點選擇Optimal Sizing and Location of Energy Storage and Photovoltaic Generation Systems in a Factory Power Grid
10
具有摺紙啟發球形連桿的新型並聯機構之設計與分析Design and Analysis of a Novel Parallel Mechanism with Origami-Inspired Spherical Linkages
11
纜線驅動並聯機器人的工作空間分析與運動控制Workspace Analysis and Motion Control of Cable-Driven Parallel Robot
12
銑削加工表面粗糙度之最佳化分析Optimal Analysis of Surface Roughness in Milling Process.
13
柔順雙穩態機構聯軸器最佳化設計與分析Optimal Design and Analysis of a Compliant Bistable Mechanism Coupling
14
汽車鍛件設計與製程最佳化分析Automobile Forged Parts Design and Process Optimization Analysis
15
受摺紙結構啟發的負剛度隔振器之最佳化設計與分析Optimal Design and Analysis of a Vibration Isolator with Negative Stiffness Inspired by Origami Structure
16
汽車傳動鍛造零件預成形模具之最佳化設計分析Optimization Design Analysis of Pre-Forming Die for Forged Parts of Automobile Transmission
17
應用田口灰關聯分析於汽車預成形鍛件之最佳化設計Optimization Design of Pre-Forming for Forged Parts of Automobile Using Taguchi Method Based Grey Relational Analysis
18
用於混沌安全通信系統之基於同步控制的干擾觀測器Disturbance Observer Based on Synchronization Control for Secure Communication of the Chaotic Systems
19
鑽頭扭轉角與低溫冷卻劑對碳纖維增強聚合物鑽孔過程影響之性能評估與分析Performance Evaluation and Analysis of the Influence of Twist Angle of Drill and Cryogenic Coolant for Drilling Process of Carbon Fiber-Reinforced Polymer
20
不同切削條件下難切削材料加工性能效率的實驗研究Experimental Investigation of Efficiency of Machining Performance for Difficult-to-cut Materials under Different Cutting Conditions
21
仿生含羞草氣動式軟機器人夾爪之最佳化設計與分析Optimal Design and Analysis of a Mimosa Bionic Pneumatic Soft Robotic Gripper
22
三重半橋式柔順機構微抓爪之設計與分析Design and Analysis of a Microgripper Based on Triple-Stair Half Bridge-Type Compliant Mechanism
23
葉片式撓曲兩自由度調諧質量阻尼平台之最佳化設計與分析Optimal Design and Analysis of a Leaf Flexure-Based 2-DOF Tuned Mass Damping Stage
24
電腦輔助工程分析及數位修護技術於3D文物保存應用之研究Application Research of Computer Aided Engineering Analysis and Digital Repair Technology in the Preservation of 3D Cultural Relics
25
不同型式直接甲酸鉀燃料電池性能探討與比較Performance Investigation and Comparison of Different Types on Direct Potassium Formate Fuel Cells
26
應用於中風後手部痙攣處之穿戴式外骨骼連桿機構設計與分析Design and Analysis of a Wearable Exoskeleton Linkage Mechanism Applied to Hand Spasticity after Stroke
27
應用 TIG 與摩擦攪拌焊接法探討鋁合金與不銹鋼及鋁合 金與雙相鋼間銲接接頭之銲接特性Study on the Welding Features of the Weld Joint between Aluminum Alloy to Stainless Steel and Aluminum Alloy to Dual Phase Steel by Using TIG and Friction Stir Welding
28
剛性與柔順機構的設計與分析Design and Analysis of Rigid and Compliant Mechanisms
29
精密定位系統之設計分析Design and Analysis of Precision Positioning System
30
被動式踝足矯形器之設計與分析Design and Analysis of Passive Ankle Foot Orthosis
31
人工牙根與支台齒之最佳化疲勞分析Optimized Fatigue Analysis of Dental Implants and Abutment
32
應用於中風垂足復健之可調式被動牽引踝足矯形器的設計與分析Design and Analysis of the Adjustable Passive Traction Ankle-Foot Orthosis for the Rehabilitation of Stroke Drop-Foot
33
汽機車鍛件缺陷預成形最佳化設計分析Optimization Design Analysis of Defect Pre-forming for Forged Parts of Automobile/Motorcycles