陳道星 教授 兼 系主任
- 系所：機械工程系
- 研發領域：機械工程
- 標籤： 材料與能源
- 專長： 材料動態性質分析,TEM/SEM顯微結構分析,複合材料,非晶質材料,高低合金,透明導電薄膜材料
- 學歷：
國立成功大學機械工程博士
- 經歷：
- 電話：(07)381-4526#15330
- 傳真：(07)383-1373
1
熱固性與熱塑性纖維複合材料產品成型差異研究Study On The Difference In Molding Of Thermosetting And Thermoplastic Fiber Composite Products
2
不同鎳基合金之動態機械性質與顯微結構分析The Dynamic Mechanical Properties and Microstructural Analysis of Different Nickel-Based Alloys
3
純鎳與不同鎳基合金之機械特性與顯微觀結構之分析Analysis of Mechanical Properties and Microstructural Characteristics of Pure Nickel and Different Nickel-Based Alloys
4
肥粒鐵系不銹鋼表面凹凸條紋改善之研究Research on the improvement of Ridging on the surface of ferrite-based stainless steel
5
添加不同元素對CoCrFeNi與AlCrFeNiTi基高熵合金機械性質與微觀結構之特性研究A study on the effects of addition different elements on the mechanical properties and microstructural evolution of CoCrFeNi and AlCrFeNiTi based high-entropy alloys
6
不同摻雜元素對ITO:Ga薄膜之性質研究Study on the properties of ITO:Ga film with doped different elements
7
銅合金及鋁合金動態機械性質與顯微結構分析The Dynamic Mechanical Properties and Microstructural Analysis of Copper Alloys and Aluminum Alloys
8
310沃斯田鐵不鏽鋼機械性能測試之研究Research on Mechanical Properties Test of 310 austenitic stainless steel
9
鎳鉻鉬鋼及鉻鉬鋼在不同應變速率下的機械性質特性分析Analysis of Mechanical Properties of alloy SNCM420 and SNCM616 and SCM415 Steels under Different Strain Rates
10
添加不同元素對 CoCrFeNiV 基高熵合金之機械性質與微觀結構之研究Mechanical properties and microstructural evolution of CoCrFeNiV based high-entropy alloys with different elements added
11
不同應變速率對鋯基非晶質合金之機械性質與破壞機制研究Study on mechanical properties and fracture mechanism of Zr-based bulk metallic glasses under different strain rates
12
雙卡套接頭之後卡套的幾何形狀對裝配後應力分布的研究A Study on Geometric Design of Back Ferrule and its Effect on Stress Distribution
13
退火製程與摻雜元素對ITO及ZnO薄膜之光電特性研究Study of Photoelectric Properties of Doped Elements on ITO and ZnO Thin Films by different Annealing Process
14
合金薄膜在Ni表面的成長機制及機械特性Growth mechanism and mechanical properties of alloy films on Ni surfaces
15
AlCoCrFeNi高熵合金之微結構與機械特性Microstructure and mechanical characteristics of AlCoCrFeNi high-entropy alloys
16
不同摻雜元素對TiO2薄膜之性質研究Study on the properties of TiO2 film with doped different elements
17
鋼材熱處理脆裂現象之研究Study on Brittle Fracture in Heat-Treated Steel
18
鉭銅合金非晶相奈米多層膜強化機制及變形習性之研究A study on strengthening mechanism and deformation behavior of CuTa/CuTa amorphous/amorphous nanomultilayers
19
水下耐壓結構承受瞬時負荷之動態響應 及疲勞壽命之研究Research on dynamic response and fatigue life of submersible structures subjected to instantaneous loading
20
沃斯田鐵不鏽鋼與雙相不鏽鋼在不同應變速率下的機械性質特性分析Analysis of Mechanical Properties of Austenitic Stainless Steels 321 and 904L and Duplex Stainless Steel 2205 under Different Strain Rates
21
添加不同元素於CoCrFeNi基高熵合金之機械性質及破壞結構之分析Analysis of mechanical properties and failure structure of CoCrFeNi-based high-entropy alloys with different elements added
22
添加不同元素對鋯基非晶質合金之機械性質與破壞機制研究Study on the mechanical properties and failure mechanism of Zr-based amorphous alloys by adding different elements
23
不同摻雜元素對Zr:ZnO薄膜之性質研究Study on the properties of Zr:ZnO film with doped different elements
24
以麻田散體不鏽鋼特性分析之研究Research on Characteristic Analysis of Martensite Stainless Steel
25
奈米碳管複合材料撞擊性能測試Impact performance test of carbon nanotube composites material
26
碲化鉍奈米薄膜的熱導率和機械性能Thermal conductivity and mechanical properties of bismuth telluride nanofilms
27
添加Nb、Co元素對TiNi基金屬間化合物之機械性質與微觀結構之研究Mechanical properties and microstructural evolution of TiNi based intermetallic alloy with Nb and Co elements
28
不同耐腐蝕鎳基合金之動態機械性質與顯微結構分析The Dynamic Mechanical Properties and Microstructural Analysis of Different Corrosion Resistance Nickel-Based Alloys
29
不同應變速率對鋁鉻鉬與鉻鉬合金鋼機械性質的特性分析Analysis of Mechanical Properties of SACM645 and SCM420 and SCM440 Steels with Different Strain Rate
30
不同不鏽鋼在不同應變速率下之機械性質與顯微結構之特性研究Mechanical Properties and Microstructural of Different Evolution Stainless Steel Under Different Strain Rates
31
冷軋鋼板邊波與工輥弧度之研究The study of cold rolled strip edge wave and roll crown by using Tagachi method
32
不同元素對於碳鋼之機械性質與顯微結構之特性研究Mechanical Properties and Microstructure of Carbon Steel with Different Compositions
33
添加Hf、Mo元素對Nb-Si-Ti基金屬間化合物之機械性質與微觀結構之研究Mechanical Properties and Microstructural Evolution of Nb-Ti-Si Based Intermetallic Alloy with Hf and Mo elements
34
不同摻雜元素對SnO2多層膜之光電性質的特性研究Study of the optical and electrical properties of SnO2 multilayer films with doped different elements
35
添加不同元素於鐵基金屬玻璃之機械性質與微觀組織特性研究Effect of different elements on the mechanical and microstructural evolution of Fe based bulk metallic glasses
36
熱處理條件對鎳鉻鉬鋼之機械性質與顯微結構之特性分析The Heat Treatment condition effect on the Mechanical Properties and Micro Structure of alloy SNCM Steel