江家慶 教授 兼 副系主任
- 系所：機械工程系
- 研發領域：機械工程
- 標籤： 機械設計,機械製造技術
- 專長： 準分子雷射(Krf)微細加工,光纖加工與光電感測開發,高溫材料性質應力腐蝕防治,材料機械性質有限元素及實驗應力分析
- 學歷：
國立臺灣大學機械所博士
- 經歷：
- 電話：07-381-4526#15340
- 傳真：07-383-1373
1
訓練用或設計用調整式球拍裝置
2
導電高分子光纖感測裝置及其製造方法
3
具隱藏式卡掣構造之地墊裝置
4
長週期光纖光柵的製造方法
5
低溫磁控濺鍍製備光纖感測裝置之方法(Method of preparing fiber sensing devices through low-temperature magnetic control sputtering)
6
低溫磁控濺鍍製備光纖感測裝置之方法
1
具靜電紡絲PVA摻雜硒化鎘量子點之長週期光纖光柵濕度感測器之研究A study on the Application of Electrospinning PVA with CdSe QD at Long Period Grating Sensor for Humidity Measurement
2
具逐層堆疊法石墨烯量子點感測層之光纖法布里-佩羅感測器基於空氣共振腔應用於汞離子溶液濃度量測之研究A study of Optical Fiber Fabry-Pérot Sensor with Layer-by-Layer Stacked Graphene Quantum Dot Sensing Layer for Mercury Ion Solution Concentration Measurement
3
利用熔融沈積建模 3D 列印製造寬可調光纖布拉格光柵加速度計以增強靈敏度的研究The study of Fabrication a Widely Tunable Fiber Bragg Grating Accelerometer using Fused Deposition Modeling 3D Printing for Sensitivity Enhancement
4
鎳基超合金與高強度低合金鋼異質接合介面之靜動態材料性質對抗衝擊特性之影響Effects of Static and Dynamic Material Properties on Impact Resistance of Inconel and HSLA Dissimilar Metal Bonding
5
商業用液化石油氣用罄自動發訊系統之研究Research on Automatic Signaling System of Commercial Liquefied Petroleum Gas Running Out
6
TiO2光電極敏化劑對U型光纖感測器光電轉換的影響The impact of TiO2 photoelectrode sensitizers on the photoelectric conversion of U-shaped optical fiber sensor
7
CO2雷射金屬製程布拉格光纖光柵三叉戟結構應變規及布拉格光纖光柵電磁鐵鋼鐵厚度量測系統CO2 laser metal processing fiber Bragg grating trident structure strain gauge and fiber Bragg grating electromagnetic steel thickness measurement system
8
透過奈米複合材料的晶片增強效應對功能化光纖進行原位檢測In situ detection of functionalized optical fiber via chip reinforcing effect of nanocomposite
9
U 型感測器基於微流道系統用於不同濃度之葡萄糖與汞離子溶液之研究A Study Of U-Shaped Optical Fiber Sensor For Sensing Different Concentrations of Glucose and Ion Liquid (HgCl2) And a Fabrication of Microfluidics System
10
振動測量的光纖布拉格光柵 (FBG) 加速度傳感器的設計與優化之研究The Study of Design and Optimization of Fiber Bragg Grating (FBG) Acceleration Sensor for Vibration Measurements
11
具金屬鍍層光纖溫度感測器之研究與應用The study of metal coated optical fiber temperature sensor with application
12
GRP結構與異種材料界接強度與水分監測分析之研究The study of the interface strength and moisture monitoring analysis of GRP structure and dissimilar materials
13
非建築結構玉米大豆桶槽之結構分析Structural analysis of non-building structure corn and soybean barrels
14
5083鋁合金板材彈、塑性 變形對腐蝕特性之探討Study on Corrosion Effect of Elastic and Plastic Deformation of 5083 Aluminum Alloy Sheet
15
以田口方法找出小型冷凍乾燥機最佳化製成之研究Taguchi Method Applied to Freeze Dryer Caes Optimization
16
D型雷射輔助蝕刻長週期光纖光柵感測器研製及應用D- Shaped Laser-Assisted Etching Long-Period Fiber Gratings Fabrication and Application
17
斜角布拉格光纖光柵感測器之研製與應用Fabrication and Application of tilted fiber Bragg grating sensor
18
長周期光柵光纖傳感器芯包比變化及彎曲光纖傳感器變長變徑之研究Analysis and effects of changes core to cladding ratio in long period grating fiber optics sensor and variable length and diameter in bent fiber sensor
19
布拉格光柵光纖螺栓扭力感測器之研究Study on Embedded Fiber Bragg Grating Sensor for Screw Torsion Monitoring
20
風機S355ML鋼板銲接參數影響機械性能之研究The Study on the influence of welding parameters of fan S355ML steel plate on mechanical properties
21
溫度對鉻鉬釩合金鋼的顯微組織與機械性質之影響Effect of temperature on microstructure and mechanical property of chromium-molybdenum-vanadium alloy steel
22
不鏽鋼304銲接後機械性質 與腐蝕特性之研究Study on the mechanical properties and corrosion characteristics of stainless steel 304 after welding
23
SS400低碳鋼銲接後腐蝕及金相之研究Study on Corrosion and Metallography of SS400 Low Carbon Steel after Welding
24
5083鋁合金耐壓載具承受水下爆震負荷時材料應變率變化之動態響應研究Study on dynamic response of strain rate of aluminum alloy 5083 pressure vehicle subjected to underwater Explosion
25
水下耐壓結構承受瞬時負荷之動態響應 及疲勞壽命之研究Research on dynamic response and fatigue life of submersible structures subjected to instantaneous loading
26
微通道模具封裝的彎曲型光纖高溫感測器之研究The study of curved optical fiber high temperature sensor with microchannel mould packaging
27
傾斜式布拉格光纖光柵結合 新型自組裝感測材料之研究與應用The study of tilted fiber bragg gratings combined with new self-assembling sensing materials with application
28
低碳鋼與不鏽鋼異種材料於不同遮蔽保護氣體下銲接機械與電化學腐蝕特性之研究Study on distinct shielding protective gas to mechanical and corrosion properties of dissimilar welded between stainless steel and low carbon steel
29
粉塵及粗糙度對靜電破壞影響Influence of dust and roughness onelectrostatic damage
30
D型研磨技術之雷射輔助蝕刻長週期光纖光柵研製及應用D-Shape Grinding Technology Development and Application of Laser-Assisted Etching Long-Period Fiber Gratings
31
光纖感測器最佳化設計Optimum Design of Fiber Grating Sensor
32
?類物質應用於塗料之功能性探討A Study On Coating Properties Of Terpenoids Materials
33
變焦寫入冠狀結構技術之雷射輔助蝕刻長週期光纖光柵研究Laser-assisted Etching of The Crown Structure on Long Period Fiber Gratings Based on Different Focal Lengths
34
探討奈米磁性流體包覆傾斜布拉格光纖光柵應用於平面磁場感測Characteristic of the planar magnetic field investigated through embedded nano-magnetic fluid tilted fiber Bragg gratings
35
蝶豆花矽烷鍍膜之長週期光纖柵感測pH 濃度研究The Study of Clitoria Ternatea Silane Coated Long Period Fiber Grating for pH Sensing
36
使用積層製造技術設計製作抗震型光纖感測裝置The Design of Optical Fiber Sensors using 3D Printing
37
萜類物質應用於塗料之功能性探討A Study On Coating Properties Of Terpenoids Materials
38
特殊熔射工業管線耐蝕性之研究The Study on Corrosion Resistance for Special Spray Industrial Pipeline
39
偏振式光纖感測器Polarization optical fiber sensor
40
光纖光柵加速規之研製Study and Fabrication of Optical Accelerometers Based on Fiber Bragg Grating
41
雷射輔助蝕刻型長週期光纖光柵之研製及應用Implementation and Application of Laser-Assisted Etching Long Period Fiber Gratings
42
複合式傾斜布拉格光纖光柵之研製與應用Innovational Implementation and Application of Tilted Fiber Bragg Gratings
43
高分子材料應用於彎曲光纖感測器Polymer Materials as Sensing Layer for U Shaped Optical Fiber Sensor
44
R134 冷媒運用於雙重管熱交換器最佳熱效率模擬分析Simulation Analysis of Optimal Thermal Efficiency of R134A Refrigerant for Double Tube Heat Exchanger
45
應用蝕刻不同直徑與金屬鍍層之布拉格光纖光柵於複材應變研究Study on the Strain of Composite Fiber Bragg Grating with Etched Different Diameters and Metal Coating