方得華 教授 兼 智慧機電學院院長
- 系所：機械工程系
- 研發領域：機械工程
- 標籤： 機械設計,機械製造技術
- 專長： 微機械固體力學研究,奈米元件製造與分析技術,奈米發電機與新能源技術
- 學歷：
國立成功大學機械系博士
- 經歷：
- 電話：(07)381-4526#15336
- 傳真：(07)383-1373
1
分子動力學研究高速冷噴塗金粒子於銅表面之變形特性Deformation Characteristics of High-Speed Cold Spray Gold Particles on Copper Surface by Molecular Dynamics
2
鎳鐵鈷合金之動態切削加工分析Analysis of dynamic machining of NiFeCo alloy
3
SnO2/BaSnO3異質結合氣體感測器特性及應用Characteristics and Applications of SnO2/BaSnO3 Heterojunction Gas Sensor
4
碳化鈦與碳氧化鈦奈米薄膜之熱傳導與機械特性Thermal conductivity and mechanical properties of Ti3C2 and Ti3C2O2 nano films
5
β-SiC晶片的化學機械拋光: 分子動力學模擬Chemical mechanical polishing of β-SiC wafers: Molecular dynamics simulation
6
二氧化錫-鑭鈣鐵氧異質結合奈米纖維薄膜之氣體感測與特性研究Gas sensing and properties of SnO2-LaCaFeO3 heterojunction nanofiber films
7
二氧化錫-鋅鐵氧體奈米複合纖維薄膜於氣體感測與特性研究Gas sensing and properties of SnO2-ZnFe2O4 nanocomposite fiber films
8
異質金屬氧化物結構之特性研究Characteristics of metal oxide heterostructures
9
硒化鎵二維材料之機械特性和熱傳導研究Thermal conductivity and mechanical characteristics of two-dimensional GaSe materials
10
鎳鈷鉻鐵合金的變形及加工特性Machining and deformation characterization of NiCoCrFe alloys
11
噴砂製程對油漆塗層附著力影響分析Analysis of the Influence of Sandblasting process on Paint Coating Adhesion
12
分子動力學與多尺度法研究粗糙表面之摩擦特性Friction characteristics of surface asperities using molecular dynamics and multiscale method
13
準連續法研究三維積體電路之銅對銅接合技術Cu-Cu bonding technology in three-dimensional integrated circuit using quasicontinuum method
14
分子動力學分析刀具外形的加工特性Machining characteristics of the machining tool shapes using molecular dynamics
15
分子動力學分析層狀銅銀/鋯的奈米薄膜機械特性Mechanical properties of laminated CuAg/Zr nanofilms using molecular dynamics
16
Borophene、MoS2 和InSe 單層膜的機械性能和熱傳導率Mechanical properties and thermal conductivity of borophene, MoS2 and InSe monolayers
17
合金薄膜在Ni表面的成長機制及機械特性Growth mechanism and mechanical properties of alloy films on Ni surfaces
18
分子動力學研究寬能隙半導體的奈米摩擦和界面特性Nanotribology and interfacial characteristics of wide bandgap semiconductors using molecular dynamics
19
AlCoCrFeNi高熵合金之微結構與機械特性Microstructure and mechanical characteristics of AlCoCrFeNi high-entropy alloys
20
氧化鎢-氧化鑭異質結合奈米纖維於氣體感測與特性研究Gas sensing and characteristics of tungsten trioxide-lanthanum oxide heterogeneous nanofibers
21
多尺度法研究金屬奈米沖切特性與界面力學Interfacial mechanics and nano-punching characteristics of metals using multiscale method
22
鑭鉛鐵氧/氧化鎢異質結構之氣體選擇性研究Gas Selectivity of La0.8Pb0.2FeO3 / WO3 Heterostructure
23
水分子對內燃機廢氣排放的改善Improvement of exhaust gas emissions from internal combustion engines by water molecules
24
分子動力學模擬鎳鈷鉻中熵合金之機械與加工特性Mechanical and Processing Properties of NiCoCr Medium Entropy Alloys Using Molecular Dynamics Simulations
25
利用田口法研究半導體封裝製程銲線參數優化The study on Taguchi method to wire bonding parameters optimization in semiconductor packaging process
26
碲化鉍奈米薄膜的熱導率和機械性能Thermal conductivity and mechanical properties of bismuth telluride nanofilms
27
非晶質銅鉭與結晶銅奈米多層結構的拉伸與奈米壓痕變形研究Tensile and nanoindentation deformation of amorphous CuTa/crystalline Cu nanolaminates
28
利用太陽能加熱和電加熱驅動的海水淡化系統效率研究Investigation on the efficiency of desalination systems driven by solar heating and electrical heating module
29
分子動力模擬與即時動態穿透式電子顯微鏡 壓縮技術分析鎳鈦銅合金之機械特性Mechanical properties and characterizations of NiTiCu alloys using molecular dynamics and in-situ TEM compression
30
準連續法分析粗糙金屬表面之壓印與切削特性Imprinting and cutting characteristics of rough metals surfaces using quasi-continuum method
31
奈米層狀石墨烯/銅複合材料之機械特性研究Mechanical Properties of Nanolaminated Graphene/Cu Composites
32
氧化鋅-鈣鈦礦異質結構之特性與氣體感測應用Characteristics and Gas Sensor Applications of ZnO-Perovskite Heterostructure
33
氣壓式液態封膠機點膠之最佳化研究Optimization of Air Dispensing of Liquid Dispensing Valve
34
以溶膠-凝膠法製備銀/鋁摻雜之二氧化鈦-氧化鋅複合材料及其特性研究Study on preparation and characteristics of Ag/Al -doped TiO2-ZnO composite by sol-gel method
35
背光模組之光學均齊性因子研究探討Study on Optical Uniformity Factor of Backlight Module
36
二維石墨炔機械與熱傳導特性之研究Mechanical Properties and Thermal Conductivity of Two-dimensional Graphyne Nanosheets
37
準連續法研究異質界面之機械與變形特性Mechanical and deformation characteristics of heterogeneous interface using quasi-continuum method
38
ZnO與ZnO-CuO異質結構於氣體感測器應用研究ZnO and ZnO-CuO Heterostructures for Gas Sensor Applications
39
鍺烯量子點之熱傳導與力學特性分析Thermal Conductivity and Mechanical Properties of Germanene Quantum Dots
40
機器視覺二維和三維檢測用於半導體塗層檢測Machine Vision 2 Dimensions and 3 Dimensions detection for semiconductor coating inspection
41
摻雜銀與氧化石墨烯於二氧化鈦之奈米複合材料及其光催化探討Study on photocatalysis in TiO2-based nanocomposites coupled with silver and graphene oxide