楊素華 教授
- 系所：電子工程系 (建工)
- 研發領域：電機與電子工程
- 標籤： 材料科技,電子電機
- 專長： 有激電激發光元件製作,螢光粉合成與應用,奈米線成長與應用,厚膜電激發光元件製作
- 學歷：
國立成功大學電機工程學系博士
- 經歷：
- 電話：(07)381-4526#15631
- 傳真：(07)381-1182
1
運用TRIZ改善電子公司的測試流程Using TRIZ to Improve Electronic Company Testing Processes
2
一套整合層級分析法和萃智的創新方法來改善製程品保的效能An Innovative Approach that Integrated Analytical Hierarchy Process and TRIZ to Improve the Effectiveness of Process Quality Assurance
3
優化電子製造：一種基於TRIZ的成本降低和品量改進的方法Optimizing Electronic Manufacturing: A TRIZ–Based Approach to Cost Reduction and Quality Improvement
4
應用TRIZ開發包裝設備以提高產品包裝效率Developing an Innovative Packing Machine to Enhance Packing Efficiency by TRIZ
5
應用 TRIZ 和 6 Sigma DMAIC 提高裝配線的生產率Applying TRIZ and 6 Sigma DMAIC to increase productivity at an assembly line
6
以TRIZ 方法優化裝配線中鎖螺絲站的品質和效率Optimizing Quality, and Efficiency in screwing Stations of Assembly Line through the Application of TRIZ Methodology Tools
7
結合螞蟻演算法和萃智方法來對印刷電路板装配線 時間進行優化Optimizing Assembly Time of Printed Circuit Board by Combining with the Ant Algorithm and TRIZ
8
利用離散事件模擬法改善測試和包裝流程Process Improvement of Testing and Packing by Discrete-Event Simulation
9
使用 TRIZ 方法增強潔淨室防塵維護策略Using TRIZ Methodology to Enhance Cleanroom Maintenance Strategies for Dust Prevention
10
應用6 Sigma DMAIC和TRIZ提高FAT（Final Assembly Test）製程良率Apply Six Sigma DMAIC and TRIZ to improve the yield rate of FAT (Final Assembly Test) process
11
近紅外螢光粉LiAlSi2O6:Cr3+的製備和發光特性以及用於無損檢測應用Preparation and Luminescence Characteristics of NIR LiAlSi2O6:Cr3+ for Non-Destructive Testing
12
利用水熱法分層生長氧化鋅摻雜鋁奈米結構結合氧化鎢在電致變色之應用Using Hydrothermal Method for Layered Growth of Aluminum-Doped Zinc Oxide Nanostructures Combined with Tungsten Oxide for Electrochromic Applications
13
使用 FlexSim 對裝配生產線進行仿真和優化：越南案例研究Simulation and Optimization of an Assembly Production Line using FlexSim: A Case Study in Vietnam
14
應用萃思和與實驗設計對波焊製程進行改善：以越南某電子組裝廠為例Application of TRIZ and Design of Experiments for wave soldering process: A case study of an electronic assembly in Vietnam
15
應用TRIZ和產線均衡技術來改善電子組裝廠的生產效能Applying TRIZ and Line Balancing to improve production efficiency in electronic assembly companies
16
應用 TRIZ 方法改善裝配過程中的產品錯誤Applying the TRIZ method to improve product errors during assembly
17
應用按燈取貨系統在包裝線上換料的改善The Materials Changing Improvement of Pick-to-Light System in the Packing line
18
層級分析法在SMT擺件裝配線上的應用—以富士康公司為例Application of analytic hierarchy process for pick-place machine selection in SMT assembly line: A case study in Foxconn Company
19
產業工作環境中的工作倦怠之研究A Burnout Study in Industrial Work Environment
20
精實策略對工廠運營的影響-產線案例分析The Impact of Lean Strategies on factory operations - A case study of the production line
21
量子點增色膜運用至TFT LCD液晶顯示器提升色彩飽和度Design and Promote color saturation of TFT LCD Module Using Quantum Dot Enhancement Film
22
以聚合物PMMA膠體電解質製作WO3電致變色元件之封裝與特性研究Encapsulation and Characteristics of WO3 Electrochromic Devices Fabricated with Polymer PMMA Colloidal Electrolyte
23
綠光螢光粉SrAl2O4:Eu2+, Dy3+ 製備及其輝光特性於光學信息存儲應用Preparation and Afterglow Properties of Green Phosphor SrAl2O4:Eu2+, Dy3+ for Optical Information Storage Application
24
鎢酸鹽CaWO4:Eu3+紅色長輝光螢光粉的發光特性Luminescence Characteristics of CaWO4:Eu3+ Red Persistent Phosphor
25
利用恆電位電沉積三氧化鎢結合奈米線複合薄膜之高光學調變電致變色元件Hight Optical Modulation Electrochromic Devices based on Potentiostatic Electrodeposition of WO3 Combined with Nanowire Composite Films
26
以超薄氧化鈷鎳與PEDOT:PSS緩衝層增加有機發光二極體之發光效率Enhancement on Efficiency of Organic Light-Emitting Diodes by using Ultra-Thin Co-Doped NiO and PEDOT:PSS Buffer Layer
27
全球綠色生活排名高之國家的可再生能源創新效率評估Renewable Energy Innovation Efficiency Assessment of the World’s Highest-Ranking Countries for Green Living
28
運用 DEA-Malmquist 模型分析越南電纜公司的績效Using the DEA-Malmquist model to analyze the performance of Vietnamese Electric Cable Companies
29
世界頂尖半導體公司間的永續績效分析Sustainable Performance Analysis of the World's Top Semiconductor Companies
30
使用CPM-PERT和蒙特卡羅模擬 生產電子設備項目的進度風險分析Schedule risk analysis of producing electronic equipment project using CPM-PERT and Monte-Carlo simulation
31
TRIZ在電子公司中減少生產時間和人力成本的應用Application of TRIZ to reduce time and save labor cost in electronic company's production
32
一套國家物流績效之預測研究A Grey Forecast Study of Logistic Performance Index for Countries
33
G20 國家對可再生能源使用情況的評估，考慮和不考慮不良因素的存在Assessment of Renewable Energy Usage by the G20 Countries With and Without Consideration to Bad Factor Existence
34
應用TRIZ均衡電子裝配公 司托板裝載機的工作量Application TRIZ for rebalancing workload of palletizer in electronic assembly company
35
應用 TRIZ 方法來改進製造過程：以越南某大型電子組裝廠為例Applying TRIZ Methodology to Improve the Manufacturing Process: A Case Study of an Electronic Assembly Company in Vietnam
36
運用 TRIZ 方法改善電子公司的生產成本Improving production costs in an electronics company by using the TRIZ method
37
以碳量子點增強ZnAl2O4:Eu2+,Eu3+螢光粉之發光強度Enhancement on Luminescence of Eu2+, Eu3+ doped ZnAl2O4 Phosphors Using Carbon Quantum Dots Addition
38
鋁酸鹽CaAl2O4:Eu2+藍色螢光粉的 發光特性與光學信息存儲應用Luminescence characterization of aluminate CaAl2O4:Eu2+ blue phosphor and their optical information storage application
39
PEDOT高分子材料在電致變色元件之應用PEDOT Polymer Material in Electrochromic Device Application
40
以雙電洞傳輸層增加有機發光二極體之發光效率Enhancement on Efficiency of Organic Light Emitting Diode with Double Hole Transport Layers
41
矽酸鹽Zn2SiO4: Eu3+紅色螢光粉的 發光特性與生醫檢測的應用Luminescence Characteristics and Biomedicine Test Application of Zn2SiO4: Eu3+ Red Phosphor
42
兩階段水熱法成長氧化鋅奈米柱結合雙層氧化鎢在電致變色之應用Zinc Oxide Nanorods Grown with Two-Stage Hydrothermal Method and Combined with Two-Layered Tungsten Oxide for Electrochromic Application
43
以印壓及熱差技術製作光萃取層之 綠光有機發光二極體Preparation of Light Extraction Layer for Green OLED by Using Imprinting and CTE Technology
44
鋁酸鹽NaAl11O17:Mn2+及矽酸鹽Sr2MgSi2O7:Eu2+螢光粉發光特性與指紋檢測的應用Luminescence Characteristics of NaAl11O17:Mn2+ and Sr2MgSi2O7:Eu2+ Phosphors and Their Application in Latent Fingerprint Detection
45
P型低溫多晶矽薄膜電晶體於關態之直流/交流可靠度研究分析Investigation of the Off-State DC/AC Stress Reliability in P-type Low Temperature Poly Silicon Thin Film Transistors
46
結合氟化鋰光萃取層與二氧化矽奈米粒子散射層之綠光有機發光二極體Combination of LiF Light Extraction Layers and SiO2 Nanoparticles Scattering Layers for Green Organic Light-emitting Diodes