1
結合時空域特徵多維度故障預測模型方法設計與分析
Design and Analysis on Integrating Spatiotemporal Features Fault Prediction Model Based on Multidimensional Method
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:113
2
貝葉斯上置信界算法自適應線性控制器 應用於多軸晶圓掃描機器人系統鑑別
Analysis of Bayesian upper confidence bound algorithm and applied to multi-axis wafer scanning robot control system
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:113
3
無人船雙驅動姿態制導與姿態自適應控制器設計分析
Design and Analysis of Dual-Drive Unmanned Vessels Attitude and Guidance Control System
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:113
4
模糊邏輯應用於溫度控制系統之研究
The Analysis for the temperature control of Fuzzy Logic
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:113
5
基於博弈論的無人機柔性降落起落架控制器設計與分析
Design and analysis of UAV flexible landing gear controller based on game theory.
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:113
6
冷鏈物流PMSM變頻壓縮機STG-LSTM故障診斷預測模型之設計分析
Design and analysis of the STG-LSTM fault diagnosis prediction model for PMSM variable frequency compressors in cold chain logistics
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:113
7
結合時間電價與儲能控制之工廠用電最佳化策略研究:以離散製造微電網為例
Optimal Factory Energy Management Strategy Integrating Time-of-Use Tariffs and Battery Storage Control: A Case Study of a Discrete Manufacturing Microgrid
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:113
8
2.45GHz電磁波段對於鈉氯離子水溶液的低能耗電磁之控制設計與分析
Low-Energy Electromagnetic Control Design and Analysis for Sodium Chloride Ion Aqueous Solution at the 2.45GHz Electromagnetic Spectrum
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:112
9
參數式原動機調速器之研究
The Research of Parametric Governor for Engine
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:112
10
全電式射出成型機之自適應控制系統設計與分析
Design and Analysis of Adaptive Control System for All-Electric Injection Molding Machine
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:112
11
階層化多智能體強化學習於無人機群控制與狀態意識分析
Hierarchical Multi-Agent Reinforcement Learning for UAV Swarm Control and Situation Awareness Analysis
- 學校:國立高雄科技大學
- 系所:工學院工程科技博士班
- 畢業學年度:112
12
晶圓盒移載暫存設備設計
Design of Pod Transfer and Storage Equipment for Semiconductor Industry
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:111
13
創新式永磁電機之分析與實現
Analysis and Implementation of Innovative Permanent Magnet Electric Machine
- 學校:國立高雄科技大學
- 系所:工學院工程科技博士班
- 畢業學年度:111
14
基於HSV色彩分割之蔥料生產線異物自動檢測系統分析與設計
Analysis and design of foreign objects automatic detecting system for scallion production line based on HSV color segmentation
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:110
15
立體視覺與氧化釩溫度之熱輻射測量補償矩陣函數分析設計
Analysis and Design of Compensation Function for Vanadium Oxide temperature and Stereo Vision on Long-wave Infrared Light Measurement
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:110
16
氧化釩長波紅外光測量函數分析設計及應用於深度神經網路人臉辨識追蹤
Analysis and design of vanadium oxide long-wave infrared light measurement function and applied to deep neural network human face tracking
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:109
17
自動化粉圓加工機控制系統設計
Design of Automatic Ball-shaped Tapioca Pearls Forming Machine Control System
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:108
18
軸向式磁通永磁馬達之設計與分析
Design and Analysis of Axial Flux Permanent Magnetic Motor
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:108
19
針對無人機機翼攻角與前置翼改善之飛行效率分析
Analysis of Flight Efficiency for Improving Attack Angle and Canard Effect of Unmanned Aerial Vehicles
- 學校:國立高雄科技大學
- 系所:機電工程系
- 畢業學年度:108
20
自適應多層卡爾曼濾波器設計及應用於光電酬載之影像系統
Design of multiply extended Kalman filter and applied to electro optical infrared payload vision system.
- 學校:國立高雄科技大學
- 系所:機械與自動化工程系
- 畢業學年度:107